‚Äč

C&D Aircraft Heaters and Components

C&D Technical Data

C&D continues to provide the aviation industry with the safest and most advanced combustion heater products and parts available. The superb level of reliability you have come to expect from the C&D product line must be maintained by strictly adhering to the service intervals and requirements as outlined in each component’s specific supporting technical documentation.

All of C&D’s eligibility is listed at www.aircraftheater.com. Please refer to this site to verify any and all installation substantiation.

Though C&D does offer alternate method of compliance (AMOC) to both Janitrol AD2004-21-05 and SouthWind AD81-09-09 these AMOC’s are only available through zero-time overhaul. AMOC compliance must be performed following manuals OM11000 and OM11010 (latest revision) as generated by C&D. AMOC manuals OM11000 and OM11010, are not open for distribution and may only be used with written permission from C&D Associates Inc.

“C&D Maintenance Manuals”-Updates to maintenance manuals supporting C&D heaters can be found in this section. These manuals include information specific to general upkeep and service requirements necessary for proper continued operation. As aviation safety is our chief priority, the service steps and intervals highlighted in the airworthiness limitations section of the manuals (if applicable) must be followed.
VIEW: C&D Maintenance Manuals

“Service Letters”-The service letter section provides internal revisions to installation instructions as well as changes to specific part numbers and applications. This section should be checked periodically and complied with when applicable. The issues and updates supplied are not considered a safety hazard but are provided to ensure longevity and reliability.  
VIEW: Service Letters

“Service Bulletins”- The service bulletin section provides information that C&D does consider a matter of safety. This may include installation instruction revisions and/or changes to specific parts or applications that require action. This section must be checked periodically and complied with when applicable.  
VIEW: Service Bulletins

“Alternate Method of Compliance”- The alternate method of compliance or AMOC section contains two letters of acceptance, one for Janitrol and one for SouthWind. These letters describe the specifics regarding compliance through the C&D Zero-Time overhaul, necessary to relieve AD2004-21-05 and AD81-09-09.
VIEW: AMOC

"Airworthiness Directives"- C&D has no AD's levied on any of its product line. This section is utilized to provide AD information that may affect the insulation of a C&D heater, product or part.
VIEW: Airworthiness Directives


 

VIEW: C&D Troubleshooting

 

WARNING: Approval for return to service after maintenance is the responsibility of the person who performs the maintenance and who signs the record for approval for return to service.  The owner/operator is responsible for the continued airworthiness of the aircraft.  To ensure continued safety, it is essential that appropriate data is used when inspecting, testing, and determining the acceptability/eligibility of all parts and materials.For further information please refer to AC No:20-62E and 14 CFR part 43.